IPv6-enabled Firmware Download
For the Linksys WRT54G
There are three files available for download: A Unix / Linux
gzip'ed tarball; A Windows ZIP archive; and just the firmware
image itself.
The gzip'ed tarball and the ZIP archive contain:
- Installation instructions
- The source to a utility for accessing the WRT54G via commanline
- Executables of that utility for FreeBSD, Linux, Mac OSX, Solaris,
and Windows XP using the Cygwin environment
- The firmware image (code.bin)
Unix/Linux gzip'ed tarball
Windows ZIP format
Firmware image only
All downloads are roughly 3.5 megabytes in size.
The source to the customized firmware is also available:
Firmware Source (57 MB)
Build Tools (64.5 MB)
Source to the Build Tools (55 MB)
NOTE: The source to the Build Tools is only required if you
need to try and recompile the development environment. We
strongly recommend that you try and use our build tools.
They were compiled under SuSE 9.1.
Our build tools MUST be installed in /opt/brcm. To install
them:
mkdir -p /opt/brcm
cd /opt/brcm
tar -xzf /download_path/build-tools.tar.gz
Last modified:
Tue Apr 05 12:50:15 PST 2005
Feedback: ipv6 at research.earthlink.net
Copyright 2005, EarthLink, Inc.
|
R&D
Home
|